These paper towels are VIRTUALLY LINT FREE, great for use when tinting or detailing. 500' roll -Made in the USA-
For use with GT070.
Great for cleaning windows prior to installation.
Great for cleaning windows prior to installation.
This copper scrub pad is for Dot Matrix prep ONLY. This pad will ABSOLUTELY scratch glass.
300 feet of reusable wipes.
Used to reach behind speakers and brake lights. Scrub away adhesive along the bottom edges of sloped rear windows. Uses replaceable standard White Scrub Pads (GT085) cut 2″x3″. This tool is 3″ wide by 15″ long.
Ammonia free, film-friendly aerosol spray used for cleaning film surfaces after installation. Can also be used as an adhesive remover when left to soak.
Highly recommended for use after film installations as a cleaner and polish. Helps reduce friction and condensation between film and rubber gaskets on roll-down windows.
1 quart concentrate mounting solution. Use for pressure sensitive adhesives and sputtered copper films.
Dirt-Off is a great product for prepping the glass prior to window film applications. This not only cleans the surface of the glass, but helps to remove contaminants from the pores of the glass to give you a perfectly prepped surface. In addition, Dirt-Off can be used a mounting solution for window films with CDF adhesive systems. The Dirt-Off will enable you to get the film mounted on the glass and expedite the adhesive activation.
Gallon of highly concentrated, ready to use adhesive remover.
Gallon of concentrated adhesive remover
Cleaning and application concentrate for most dry adhesives. The mild acid formulation makes this a great cleaning agent for glass contaminated with oil, grease or dirt. NOT TO BE USED WITH COPPER OR SILVER BASED FILMS.
Adhesive remover.
Slip agent to aid in window film installation.
GT1039 – Rapid Remover – 32 oz A non-toxic, water-soluable adhesive remover that breaks down and removes adhesive fast.
Great adhesive promoter even in cold weather conditions. A great solution for dot matrix areas or with vinyl products.
Dot matrix prep solution. Use to aid film adhesion over dot matrix areas in auto installs.
GT2010 – Tint Off Quarts Ready to use and specially formulated for the window film industry to make tint removal a snap. 1 quart bottles.
Tint Slime is a window tint mounting & cleaning solution. Tint Slime can be used to install automotive window tint, paint protection film, flat glass film, and vinyl. Tint Slime is free of particulates and won’t separate. Tint Slime is safe for use on interiors, biodegradable, and of course, tint safe. Concentrate, mix 1 ounce per 1 gallon of water. Mixology: 2 capfuls for 1 gallon. 1 capful for polyspray. 1/2 capful for 32 oz bottles (GT090 & GT097)
Tint Slime Ultra is a higher rated slip designed to function in high heat and high humidity installs. Tint Slime Ultra is not designed to perform as well as regular Tint Slime in climate controlled areas. (Gallon size)
Fusion Epic Orange Advanced Adhesive Remover is the adhesive remover for our industry. Fusion Tools has developed this adhesive remover specifically for the materials and adhesives used on window films, paint protection films & vinyls. Simply spray to desired area and watch Fusion Epic Orange break down the adhesive for a fast easy removal! Don’t need the products maximum strength? Dilute the formula by adding water. No Alcohol. No Ammonia.
GTXSPSDA-CA CASE Spartan SD-20 is a concentrated, synthetic all purpose cleaner and degreaser. Formulated without soap, free alkali, or ammonia. SD-20 mixes well with hot or cold, hard or soft water. The precision balance of high quality active ingredients permit effective cleaning at high dilution with water.
A specially created formula for applying PPF and wet install vinyl films. It contains no particulates, no degreasers, lanolin, or harsh chemicals that weaken the performance of your products. Slips when you need it to and tacks quickly. Mixing ration: 1 ounce per gallon of water. Distilled water works best!
The Blue SCRUB-IT replacement pads come in a 10 pack. The blue pads are more aggressive and used for removing adhesive from the glass. The pads are made of scratch resistant material but use with caution. Test on a small part of glass before use as not all glass is made the same! Please make sure to check newer vehicles for factory coatings that are applied to the inside of the glass that might be damaged by the SCRUB-IT.
The Tan SCRUB-IT replacement pads come in a 10 pack. Tan color scrub pads are great for everyday cleaning and prep work. The pads are made of scratch resistant material but use with caution. Test on a small part of glass before use as not all glass is made the same! Please make sure to check newer vehicles for factory coatings that are applied to the inside of the glass that might be damaged by the SCRUB-IT.