Wrap your vehicles faster and better. The only squeegee applicator made to use wet. No scratches, no marks, just smooth motions that easily glides across vinyl films and painted surfaces without worry of mistakes or damage. The Wet Edge Squeegee is a Teflon squeegee with a unique microfiber bonded to it. Can be used either wet or dry makes it perfect! This is the top of the line applicator in the business. Colors will vary.

4″ Mango Bump Card with extreme glide felt edge treatment.

Card squeegee with good angles that extends your area for better manipulation. Great for getting behind gaskets and rubber seals. The felt edge makes this perfect for paint protection, vinyl, signs and graphics.

Smart Cardz are the modern version of the hard card squeegee but they’re better because they are 25% wider and their tapered tip, comfortable grip, great flex and thin squeegee edge make it the smartest tool in your apron! Smart Cardz feature a grip-handle molded right into its body so they’re easy to manipulate. The felt edge makes this the perfect tool for paint protection, vinyl signs and graphics.

This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee.

Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. (Flex-Firm).

Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. (Soft).

Soft rubber card style squeegee. Recommended for paint protection installations.

Four inch hard card with two ridges or “bumps.” One edge is wrapped in felt.

Recommended for paint protection or vinyl graphic installations. The soft felt is designed to avoid scratching.

A felt wrap for any 4″ hard card squeegee.

4″ Suede replacement strip. These are die cut to fit the 4″ Speed Wing.

The knifeless tape has a high-strength filament that acts as the cutting device. The tape/filament is laid out on the vehicle, and the bulk vinyl material is installed over the tape/filament. Then, the filament is pulled through the material, leaving behind the desired design. The edge is clean and sharp, just like a knife cut, but without the risk of cutting the paint. *Not Recommended For Paint Protection By The Manufacturer.

Flexible tape and filament are engineered to create highly contoured designs with ease, resulting in sharp, clean edges. Create striping, accents, and designs that rival using a knife or plotter. Patented design stretches slightly and turns easily in any direction for one-of-a-kind works of art. Best option for very tight curves. *Not Recommended For Paint Protection By The Manufacturer.

Precisely and efficiently cut through graphic film without a knife and without surface damage to create a clean line. Used to achieve clean and uniform cuts in wide gaps between doors, fenders, and rubber moldings. For single or multiple vinyl layer applications. Create evenly cut graphics bridging from one panel to the next for a professional finish. *Roll is 164 feet long* *Not Recommended For Paint Protection By The Manufacturer.

Slip Tape is the ultimate product for making your application squeegees smoothly and safely glide across window film, paint protection, and car wrap and vinyl graphic applications. No more tearing or scratching the material you are working with. Slip Tape comes in two sizes. 3/4″ x 12 yard roll (GT2021) or 3/4″ x 4 yard roll (GT2021-4)

CLEAR HI TAC MASKING TAPE - SIZES: 99R06-AT65 6.5" 99R24-AT75 24"

99R PAPER HI TAC MASKING TAPE SIZES: 99R06-4075 6.5" 99R08-4075 8.5" 99R10-4075 10.5" 99R12-4075 12" 99R14-4075 14" 99R18-4075 18" 99R24-4075 24" 99R48-4075 48"

Faster and easier than tape or rubber bands. These brightly colored Sooper Clips are designed for efficiency. Keeps vinyl and print media properly wound. Simple on/off design with finger hole pull design. No more replacing tape or damaging vinyl roll edges. 2 sizes for both 10 and 50 yard rolls. Durable plastic design for the longest life and ease of use. Doesn’t scratch or leave marks on your delicate rolls. 2 pack; 1 large. 1 Small.

*SPECIAL ORDER ONLY. WE DO NOT STOCK THIS ITEM. PLEASE ALLOW EXTRA TIME FOR SHIPPING. Faster and easier than tape or rubber bands. These brightly colored Sooper Clips are designed for efficiency. Keeps vinyl and print media properly wound. Simple on/off design with finger hole pull design. No more replacing tape or damaging vinyl roll edges.

Mango Pro Pack with Felt This four pack applicator set includes the Mango Rebel, Bump Card, Smart Card and Little Foot all with extreme glide felt edge making them perfect for paint protection, vinyl signs and graphic installs.

he ultimate Vehicle Wrap knife! The Wrap Cut Knife by Image 1 Impact is made specifically to cut through just the liner side of any pressure sensitive vinyl graphic and wrap film. This knife will only cut through the paper release liner of the vinyl, so there is no more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper. This knife will leave no marks or cut lines in the film when used properly. Don’t be fooled by look-alike imitators

This wrap tool provides multi-functionality use by allowing the installer to reach edges and body lines like never before. This tool is a must have if you apply any graphics to challenging surfaces.

• One size fits most (spans Medium thru XL) Do not wear the GHOST WrapGlove® when climbing- Recommended “ For Ground Use Only​ GHOST™ WrapGlove® PPF•Wrap•Tint • Made in the USA • Lint Free • Static Resistant • Machine washable & Hand washable Surface performance: • Prevents oil transfer from hands to the adhesive side of the film • No Fingerprint transfer to adhesive, inherent to bare-hand application of PPF • No Hot spots from hand when working kits or large panels • Quicker movement

The new vehicle wrap glove is sold in pairs and is a must have for anyone installing vinyl graphics and vehicle wraps. Installing with your bare hands can cause over stretching and puckering of the vinyl as well as potential damage from the transfer of oils on your skin. These lint free and durable Wrap Gloves reduce friction while handling the material give you great results every time. Order WG1 for size large. Order WG1 XL for size XL

The kit includes five distinctive tools for the easy removal of body fasteners, interior trim pieces, exterior body moldings, wheel hub caps, etc. Made from heavy-duty plastic to prevent scratching and damage to vehicle surfaces.

The Bubble Popper Pen is a must have tool for any vinyl graphics installer or car wrapper. This pen is the right tool for the job and it is easy to hang on to since it clips to your shirt pocket like a “ball-point pen”. The needle point offers an ultra-sharp round tip that retracts and extends just like a “ball point pen”. This tool is used to put a pin hole (never a knife slit) into your vinyl, printed graphics or car wrap where a bubble or rivet might be to release the air and flatten the film

(6 PACK) These handy body magnets make applying vinyl and vehicle wraps faster and easier by acting as another hand to hold the material. You can also use them in the place of masking tape or pre-mask to position the material on the vehicle. Xtreme Magz are 1 5/8″ in diameter and come with the magnet completely covered with a super-soft rubber coating to eliminate any damage to the vehicle, graphics or sign substrates.

he ER1 Emblem Removal Tool is the fastest and easiest way to remove vehicle emblems and logos from a vehicle. This tool is used before the vehicle wrap/vehicle graphic application to remove emblems and logos and badges from your vehicle. Our Emblem Removal Tool comes with a set of brightly colored custom designed ergonomic handles that are easy to find and very comfortable to use. The handles feature a “loop-lock” no-scratch cutting cord that locks into the handle.

Made of stiff bristle synthetic fiber, the rivet brush for fleet graphic installers helps form flexible cut and printed vinyl over the rivet surface.

Introducing the Adhesive Primer 94 Installer’s Pen (IPEN), the world’s best application tool specifically designed using Primer 94. The Installer’s Primer Pen is easy to keep in your tool pouch, pocket, or tool box. Fast and easy to use on all your applications that require precise application of Primer 94. Works with any brand of vinyl film and can be used anywhere Primer 94 is required. Durable aluminum construction casing 2 extra tips included The easiest way to apply adhesive primer

These pre-cut buffers fit any standard 4″ squeegee. They are far superior to standard felt strips and will help prevent scratches to the wrap material during installation. Give your hard plastic squeegees a soft and smooth side with the Monkey Strip. Note: This buffer comes with a self-adhesive back that should stick to any flat squeegee surface.

(20 oz. bottle w/ spray head)

GTX905 TFX Cleaner (1 Gallon Refill)

Original Formula (1 Gallon Refill)

Made to fit standard blade holders. (12-pack)

For weeding and cutting purposes, this all-aluminum holder will hold picks up to 1/16" in size as well as most standard blades. Blades are not included.

X-Acto Knife Blades, No. 11 Blade, Pack Of 100 - Change blades frequently for safer and more accurate cutting Assorted steel blades are ground to a surgical edge for precision cutting.

(VINYL ZAPPER)

MBX 23MM

MBX 23MM

MBX 23MM

GTX341E MBX TOOL ULTIMATE ELECTRIC VARIOMATIC

MBX TOOLS