Designed to deliver rapid, precise cuts for thick gauge safety films. It is intended for precision pre-cutting on flat, square-edged tables.

Use along the top edge of roll down windows for a precise “micro-edge” finish (1/8″). Use GT137 as a replacement blade.

Flexible squeegee that is great for tight corners and maneuvering around gaskets.

A convenient trim guide or can be used to pull back gaskets.

Used this tool to pull back on rubber gaskets in auto doors to tuck film below the seal.

Used with GT050, GT062 or GT064 to obtain more leverage when applying flat glass films. (See Handled Squeegee Section)

Designed for professional installers, the BLADEater holds your knife safely and securely, and allows you to easily snap and discard blades into the replaceable well. Once the well is full, simply toss the well, blades and all.

Replacement well for BLADEater.

Blade disposer that can be emptied and re-used.

The Push Stick, also referred to as "The Bone" is a cheap and easy to use tool, designed to help you get film tucked in behind the gaskets on auto doors. MADE IN THE USA

The Push Stick, also referred to as "The Bone" is a cheap and easy to use tool, designed to help you get film tucked in behind the gaskets on auto doors. MADE IN THE USA

NO LOGO OR TEXT. BLACK ONLY. Heavy-duty waist apron for easy access to tools while on the job.

13 pocket tool apron.

The window tinting industries first and only absorbent rope braid used for absorbing water running down behind the dash of a vehicle while installing film. Helping to protect the electronics and other parts from water damage. Ends coated to prevent Frey of strands. • 90-day free replacement if defect from workmanship. • Machine Washable. • Hand Made in the USA, By Tinters for Tinters

The Mini size SoakShield is the same length as the original only 30% thinner. Able to fit better it tight gap spaced. Works great for back windows also. • Ends coated to prevent Frey of strands. • 90-day free replacement if defect from workmanship. • Machine Washable. • Hand Made in the USA, By Tinters for Tinter

Original Standard size is 5-6′ long depending on stretching it out during installation. Great for your average coupe, sedan, compact SUV. Ends coated to prevent Frey of strands. • 90-day free replacement if defect from workmanship. • Machine Washable. • Hand Made in the USA, By Tinters for Tinters

Our XL size SoakShield rope able to extend the dash on larger Cars, Trucks, Vans, and SUVs. 18” longer than Original.Ends coated to prevent Frey of strands. • 90-day free replacement if defect from workmanship. • Machine Washable. • Hand Made in the USA, By Tinters for Tinters

This model allows you to heat shrink in low or high fan speeds and has a variable temperature setting to fine tune the amount of heat needed for a specific application. 120 Volt Use

Standard heat gun with high, medium, low settings. (120 Volt).

Heat resistant gloves great for use during heat shrinking.

Replacement bottle for the Jiffy Steamer (GT921).

Smooth-IT is designed to effectively and evenly smooth out the edge of most tools used for film installation. It works great on plastic and rubber tools. The black mat is a medium fabric that works best and faster on big or deep scratches in the tool’s edge. Replacement mats can be purchased as part GT2082B

This tool is designed to effectively and evenly smooth out the edge of most tools used for film installation. It works great on plastic and rubber tools. The grey mat is a fine fabric that is ideal for removing small or light scratches from the tool. Replacement mats can be purchased as part GT2082G.

Grey replacement mat for the Smooth-It. (3 pack) The grey (1000D) is a fine fabric, ideal for removing small or light scratches on your installation tools.

Black replacement mat for the Smooth-It. (3 pack) The black (600D) mat is a medium fabric that works best and faster on big or deep scratches.

The J4000W has a large 1 gallon internal water reservoir and provides 2 hours of continuous steam before refilling. Quick 15 minute heat-up time. Go from PREHEAT mode to full steam power in just two minutes. Has a flexible 7.5′ hose for easy maneuverabilty on the job and an angled 9″ aluminum steam head concentrates steam into a targeted area for precise removal. Steam-resistant nitrile gloves included in each unit. 120 volt; alternate voltage available upon request.

The Jiffy Steamer is a commercial steamer, impact resistant, 1300 watt heating element, heats up in 2 minutes with 2 hours of steaming per filling. Great for removing film and adhesive off back windows. 120 Volt Use. 220 Volt available as special order.

GT921B Jiffy Steamer J2W Replacement Fuse

Highly resistant to weather, UV and temperature extremes One-part, medium-modulus neutral-cure adhesive/sealant silicone material Supports glass and other panel materials under high wind load Weatherproofs substrates such as glass, aluminum, steel, painted metal, EIFS, granite & other stone, concrete, brick, plastic Ready to use as supplied with all-temperature gunnability, easy tooling and low-odor curing

A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.

Gasket Push Sticks are used to push down the gasket lips on roll down windows allowing the window film to be installed below the gasket line. The long and thin design can also be used to focus pressure and push out small fingers / bubbles deep in a rear deck, windshield area or very tight corners in port windows.