An overall heavy duty sprayer, this spray bottle comes with a 5 year warranty and is chemically resistant. It is equipped with a strong trigger and holds 32 ounces.

This pressurized spray bottle holds more solution than the 32 ounce bottles and reduces “finger-fatigue” by eliminating the need for pumping while spraying via a simple trigger. Handy for large windows and long-duration sprays. Has an adjustable spray nozzle. (1.25 liters)

The next generation in spray bottles, the Mercury PRO + features viton seals and a double action pump that sprays both when you pull back and when you release the trigger giving you more liquid with each pull. This lightweight ergonomic trigger/bottle combo holds up to 1 liter (33 ounces) of fluid.

RED MERCURY PRO TRIG+BOTTLE RED PRO 360 DEGREES

Pressurized spray bottle holds 48 oz of liquid and reduces “finger-fatigue,” eliminating the need for pumping while spraying via a simple trigger. Has an adjustable spray nozzle.

Empty 32 ounce bottle.

High output trigger for use with GT097, 32 oz bottle.

Deluxe pressure sprayer holds up to 5 gallons of mounting solution in a stainless steel tank. Hose can reach up to 15′ in length. Fill with solution and pressurize with air from any compressor. Curly, flexible hose reaches into cars or stretches to go up a ladder with you.

Replacement spray gun for GT101N 3-y Gal Liquid Max Max PSI is 130 Pounds w/auto Relief valve

Replacement hose and spray gun for GT101N

An alternate nozzle for the 3 gallon pressure sprayer.

This pressure sprayer has a 15′ flex line hose with a brass tip nozzle. The no curl hose allows for less tension when maximizing the reach. A great sprayer for any type of installation. 3-y Gal Liquid Max Max PSI is 130 Pounds w/auto Relief valve

15′ flex line hose and Gilmore nozzle assembly for 5 Gallon Stainless Steel Sprayer.

Brass tip Gilmore nozzle. Use with flex line hose. (Does not fit on the GT101-HG hose).

The Film Handler comes standard with 2 each Cutter Head Assembly (GT912), 2 each 3″ Roller Assembly (GT904) and one pack of blades (GT943). Includes Metric and Imperial measurements. LADDER NOT INCLUDED

Repair Kit for your Film Handler.

Replacement blades for the Film Handler. 20 blades per cartridge.

This is the base and the swivel head of the blade holder on the Film Handler.

Use for security film on 6″ cores. Comes with 12″ risers to accommodate the larger cores. Sold as pairs (2)

Standard roller assembly on Film Handler. These are 6″ risers and will accommodate film on 3″ cores. Sold as a pair (2).

Sold per each (1)

Sold per each (1)

Sold per each (1)

72″ aluminum U-channel for sliding over the edge of a film box-top to serve as a straight edge when making horizontal cuts (across the web width) after pulling film out to desired length. Handy for in-field work. Saves the cost of more expensive film cutters.

Use with GT822 Uses standard 1" blade

Sold Individually. Clean cut is back and better than ever! Available in 36″, 48″, 60″ and 72″ sizes. The new and improved bars are an alloy U-channel in a brushed polished finish. Each bar has a ruler across the top edge for precise measuring and placement of the Cutter Head. These bars fit securely on the edge of the inner product box to keep everything from moving while making your cut. Simply line the edge of the film up with the zero mark on the ruler and press the bar down on the box.

Cutter head assembly for the clean cut box slitter. The Clean Cut Cutter Head is now machined from composite with two neodymium magnets that provide tremendous attachment to the Clean Cut Bar. The Cutter Head will fit firmly on the back side of the Clean Cut Bar at the measurement you would like to slit the film. Once you have the Cutter Head in place simply slide the material through the slot and pull the material through to create a clean cut edge.

A five pack of replacement blades for the Clean Cut Cutter Head (GT1002CH)

The CLEAN CUT BOX TRAY is really easy to set up. Place the tray on the top of the ladder to mark where the mounting hole will be. Drill out the mounting hole in the top of the ladder with the appropriate sized drill bit. Set the two nuts at the stop distance on the eyeball bolt. Tighten until the top of the bolt pops through the mounting hole. The tray is 36” long. The sides are at a 45 degree angle and that depth is 5”. The width is 7”