The knifeless tape has a high strength filament that acts as the cutting device. The tape/filament is laid out on the vehicle and the bulk vinyl material is installed over the tape/filament. Then, the filament is pulled through the material leaving behind the desired design. The edge is clean and sharp just like a knife cut but without the risk of cutting the paint.
Use Design Line Knifeless Tape to create graphic elements and striping on single layers of vinyl that have curves and contours. Design Line tape stretches more than other products so it follows contours and turns easier
Slip Tape is the ultimate product for making your application squeegees smoothly and safely glide across window film, paint protection, and car wrap and vinyl graphic applications. No more tearing or scratching the material you are working with. Slip Tape comes in two sizes. 3/4″ x 12 yard roll (GT2021) or 3/4″ x 4 yard roll (GT2021-4)
Faster and easier than tape or rubber bands. These brightly colored Sooper Clips are designed for efficiency. Keeps vinyl and print media properly wound Simple on/off design with finger hole pull design No more replacing tape or damaging vinyl roll edges 2 sizes for both 10 and 50 yard rolls Durable plastic design for longest life and ease of use Doesn’t scratch or leave marks on your delicate rolls Sold as a 50 pack (SC50) or a 2 pack (SC2) 50 pack; 25 large and 25 small (SC50) 2 pack; 1 large
Recommended for paint protection or vinyl graphic installations. The soft felt is designed to avoid scratching.
Soft rubber card style squeegee. Recommended for paint protection installations.
A felt wrap for any 4″ hard card squeegee.
Four inch hard card with two ridges or “bumps.” One edge is wrapped in felt.
Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. (Flex-Firm).
Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. (Soft).
4″ Suede replacement strip. These are die cut to fit the 4″ Speed Wing.
Smart Cardz are the modern version of the hard card squeegee but they’re better because they are 25% wider and their tapered tip, comfortable grip, great flex and thin squeegee edge make it the smartest tool in your apron! Smart Cardz feature a grip-handle molded right into its body so they’re easy to manipulate. The felt edge makes this the perfect tool for paint protection, vinyl signs and graphics.
Card squeegee with good angles that extends your area for better manipulation. Great for getting behind gaskets and rubber seals. The felt edge makes this perfect for paint protection, vinyl, signs and graphics.
This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee.
4″ Mango Bump Card with extreme glide felt edge treatment.
Mango Pro Pack with Felt This four pack applicator set includes the Mango Rebel, Bump Card, Smart Card and Little Foot all with extreme glide felt edge making them perfect for paint protection, vinyl signs and graphic installs.
he ultimate Vehicle Wrap knife! The Wrap Cut Knife by Image 1 Impact is made specifically to cut through just the liner side of any pressure sensitive vinyl graphic and wrap film. This knife will only cut through the paper release liner of the vinyl, so there is no more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper. This knife will leave no marks or cut lines in the film when used properly. Don’t be fooled by look-alike imitators
This wrap tool provides multi-functionality use by allowing the installer to reach edges and body lines like never before. This tool is a must have if you apply any graphics to challenging surfaces.
• One size fits most (spans Medium thru XL) Do not wear the GHOST WrapGlove® when climbing- Recommended “ For Ground Use Only GHOST™ WrapGlove® PPF•Wrap•Tint • Made in the USA • Lint Free • Static Resistant • Machine washable & Hand washable Surface performance: • Prevents oil transfer from hands to the adhesive side of the film • No Fingerprint transfer to adhesive, inherent to bare-hand application of PPF • No Hot spots from hand when working kits or large panels • Quicker movement
The new vehicle wrap glove is sold in pairs and is a must have for anyone installing vinyl graphics and vehicle wraps. Installing with your bare hands can cause over stretching and puckering of the vinyl as well as potential damage from the transfer of oils on your skin. These lint free and durable Wrap Gloves reduce friction while handling the material give you great results every time. Order WG1 for size large. Order WG1 XL for size XL
The kit includes five distinctive tools for the easy removal of body fasteners, interior trim pieces, exterior body moldings, wheel hub caps, etc. Made from heavy-duty plastic to prevent scratching and damage to vehicle surfaces.
The Bubble Popper Pen is a must have tool for any vinyl graphics installer or car wrapper. This pen is the right tool for the job and it is easy to hang on to since it clips to your shirt pocket like a “ball-point pen”. The needle point offers an ultra-sharp round tip that retracts and extends just like a “ball point pen”. This tool is used to put a pin hole (never a knife slit) into your vinyl, printed graphics or car wrap where a bubble or rivet might be to release the air and flatten the film
The Fusion PPF Hornet 4″ Paddle Squeegee is the latest in Paint Protection Film installation tools. This triple durometer paddle squeegee offers the handler two durometers to install with. The black install side measures in at a firm but flexible 80 durometer and the yellow side at a softer more pliable 70 durometer. The red “spine” between the two layers acts as a rigid support core for the soft squeegee blades on both sides.
This paddle squeegee is dual durometer and designed for paint protection films that feature a durable hard coat. The blue side of the PPF Hybrid is a hard 94 durometer while the orange side is a more flexible 85 durometer.
The PPF Black Out is a squeegee blade designed specifically for paint protection film installs, but has also become a favorite in the automotive window film industry. The PPF Black Out features a high content of slip additives to help the tool slide easily across paint protection films. At 88 durometer it is flexible enough to conform to odd surfaces. Pair this blade with a magnetic Fusion Hand Dee (GT037) to help hold the paint protection film in place during installation.
The PPF Black Out is a squeegee blade designed specifically for paint protection film installs, but has also become a favorite in the automotive window film industry. The PPF Black Out features a high content of slip additives to help the tool slide easily across paint protection films. At 88 durometer it is flexible enough to conform to odd surfaces. Pair this blade with a magnetic Fusion Hand Dee (GT037) to help hold the paint protection film in place during installation.
he ER1 Emblem Removal Tool is the fastest and easiest way to remove vehicle emblems and logos from a vehicle. This tool is used before the vehicle wrap/vehicle graphic application to remove emblems and logos and badges from your vehicle. Our Emblem Removal Tool comes with a set of brightly colored custom designed ergonomic handles that are easy to find and very comfortable to use. The handles feature a “loop-lock” no-scratch cutting cord that locks into the handle.
Introducing the Adhesive Primer 94 Installer’s Pen (IPEN), the world’s best application tool specifically designed using Primer 94. The Installer’s Primer Pen is easy to keep in your tool pouch, pocket, or tool box. Fast and easy to use on all your applications that require precise application of Primer 94. Works with any brand of vinyl film and can be used anywhere Primer 94 is required. Durable aluminum construction casing 2 extra tips included The easiest way to apply adhesive primer
GTX705 PINK PPF SQUEEGEE 3PC SET PPF Tools Window Tint Pink Squeegee Scraper, Professional TPU rubber squeegee for vinyl wraps, water wiper, glass cleaning, and so on. High-quality window wipers are made of rubber, light and small, flexible to use better surface contact, and convenient storage. Good choice for car vinyl wrap PPF coating installation.
Perfect Circles with Ease: Cut parking sensor holes from 18mm to 32mm with precision, thanks to a finely tuned blade guide system.