CLEANING, PREP AND CHEMICALS
For use with GT070.
Great for cleaning windows prior to installation.
Great for cleaning windows prior to installation.
This copper scrub pad is for Dot Matrix prep ONLY. This pad will ABSOLUTELY scratch glass.
300 feet of reusable wipes.
Used to reach behind speakers and brake lights. Scrub away adhesive along the bottom edges of sloped rear windows. Uses replaceable standard White Scrub Pads (GT085) cut 2″x3″. This tool is 3″ wide by 15″ long.
Ammonia free, film-friendly aerosol spray used for cleaning film surfaces after installation. Can also be used as an adhesive remover when left to soak.
Highly recommended for use after film installations as a cleaner and polish. Helps reduce friction and condensation between film and rubber gaskets on roll-down windows.
1 quart concentrate mounting solution. Use for pressure sensitive adhesives and sputtered copper films.
1 quart concentrate cleaning solution. Use for interior automotive window cleaning. Great for removing oily deposits on automotive glass. Dirt-Off can calso be used as an adhesive accelerant to give additional tack for dot matrix areas.
Gallon of highly concentrated, ready to use adhesive remover.
Gallon of concentrated adhesive remover
Cleaning and application concentrate for most dry adhesives. The mild acid formulation makes this a great cleaning agent for glass contaminated with oil, grease or dirt. NOT TO BE USED WITH COPPER OR SILVER BASED FILMS.
Adhesive remover.